Máy lọc nước siêu sạch Large Direct-Pure EDI

Large Direct-Pure ED

Rephile- Mỹ

12 tháng

The Large Direct-Pure EDI lab water system produces Type II water from tap water directly. Resistivity of product water is above 5 MΩ·cm (25℃) ,which meets or exceeds Type Ⅱ water quality standard defined by ASTM, CAP, CLSI and ISO 3696/BS 3997, the European and U.S. Pharmacopoeia. The System is designed for users who need 400 to 1800 liters of Type II water per day.

Máy lọc nước siêu sạch

Model: Large Direct-Pure EDI 

Hãng sản xuất: Rephile- Mỹ

Nhà máy sản xuất tại Thượng Hải- Trung Quốc

The Large Direct-Pure EDI lab water system produces Type II water from tap water directly. Resistivity of product water is above 5 MΩ·cm (25℃) ,which meets or exceeds Type Ⅱ water quality standard defined by ASTM, CAP, CLSI and ISO 3696/BS 3997, the European and U.S. Pharmacopoeia. The System is designed for users who need 400 to 1800 liters of Type II water per day.
Features:
- The system incorporates the best in class Siemens EDI module to deliver high quality Type II water consistently at relatively lower cost.
- Automatic water quality control programs ensure EDI product water meeting or exceeding Type II water requirements.
- The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life monitoring as well as many other programs for convenient operation.
- The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures.
- Users can set water dispensing time for easy water collection.
- RephiLe can provide full document support to meet users’ GMP, GLP, FDA and other certification requirements. 
Main Applications:
- Type II Pure water can be used in many areas. Some of the typical applications are:
- Preparation of bio-reagents
- Preparation of culture media
- Preparation of solution for chemical analysis such as HPLC, ICP etc.
- For clinical analyzers
- Feed water for ultrapure water systems
- Medical device and equipment rinsing
- For serum and blood fractions
- For ophthalmics
Specification:

 Feed Water Requirements  
 Tap water*  Municipal water, TDS < 1000 ppm (2000 μS/cm)
 Operating Temperature  5~45 ℃
 Feed Water Pressure  30 - 90 psi (2 - 6 bar)
 Product Water Flow Rate  Typically 30, 60 or 125 L/h (at 25℃)
 Product Water Quality  
 Resistivity  > 5 MΩ·cm @ 25 ℃ (typically > 10 MΩ·cm @ 25℃)
 TOC  < 30 ppb
 Particle (> 0.2 μm)  < 1/ml (with a 0.2 μm final filter)
 Microorganisms  < 1 cfu/ml (with a 0.2 μm final filter)
 Pyrogens (endotoxins)  < 0.001 Eu/ml (with a terminal ultrafiltration cartridge)
 Dimensions  
 Length x Depth x Height  40.0 cm X 49.0 cm X 110.0 cm

*If water hardness is greater than 1000 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.

Ordering information:

 Description  Catalog No.
 Direct-Pure Water System, EDI 30  RD0E0300E
 Direct-Pure Water System, EDI 60  RD0E0600E
 Direct-Pure Water System, EDI 125  RD0E01H0E

 

CÔNG TY TNHH KHOA HỌC VÀ CÔNG NGHỆ 3B là đại diện chính thức của hãng Rephile- Mỹ tại Việt Nam. Chúng tôi chuyên tư vấn giải pháp toàn diện về máy lọc nước siêu sạch cho các ứng dụng phòng thí nghiệm như AAS, GC-MS, HPLC, Sinh học phân tử, Nuôi cấy mô, chuẩn bị mẫu,...

 

Để được tư vấn về sản phẩm xin vui lòng liên hệ với chúng tôi:

CÔNG TY TNHH KHOA HỌC VÀ CÔNG NGHỆ 3B

Phòng Kinh doanh: 0948.27.99.88- Mr. Ba

Email: ba.thietbi@gmail.com

 

Chúng tôi luôn sẵn sàng phục vụ Quý Khách!

Sản phẩm cùng loại

Top

   (0)